Creative techniques with paint and varnish – 25 ideas for surface design

Despite their exceptional color scheme, smooth, monochrome surfaces can seem too ordinary and boring. Through simple creative techniques with paint and varnish gets every wall or every piece of furniture a new face. Different methods and surface treatments help to set effective accents and transform entire areas. What is possible with simple means, we show you below.

A color-on-color effect can be created in various ways, each producing a different look. These techniques require two wall paints -- satin and semi-gloss finishes -- in the same color.                                                                                                                                                     More

Small tricks when applying the paint or glaze on a surface in the end, a great effect. As a result, even a special wall plaster can be imitated intriguing or even create an original pattern. Whether a small piece of furniture or a whole wall, every surface becomes a valuable one-off by means of craftsmanship.

blue ombre wall blending

A successful design that withstands time definitely needs careful preparation. Before applying the new paint, a wall should be primed. Depending on what kind of wall plaster it is, this is pretreated with a suitable primer and only then the base color is applied and, if necessary, twice. Then you can start with the decorative wall design.

DIY Ideas for Painting Walls - Mountain Mural Bedroom Makeover - Cool Ways To Paint Walls - Techniques, Tips, Stencils, Tutorials, Fun Colors and Creative Designs for Living Room, Bedroom, Kids Room, Bathroom and Kitchen

If a piece of furniture is embellished with paint or varnish, a pre-treatment of the surface is also required. Veneered or varnished furniture must first be roughened with sandpaper (grit size 240) and then rubbed off with acetone. The goal is to remove the top glossy layer for the new color to adhere well. For raw wood, two coats are required – a primer and the glaze. First, the wood is sanded lightly with grit 150, whereupon the first coat of paint takes place. After about 1 to 12 hours, the surface is sanded again, this time with a grain size of 240. Subsequently, another layer of varnish.

Painting New walls to make look like Old Walls

Creative techniques with paint and varnish produce different, effective and effective effects. It makes sense to do a few experiments first and experiment on plain paper. Matte or metallic colors can be adjusted, but above all, they are not harmful to health and the environment. Depending on the effect you can achieve, different tools such as brushes, foils, sponges and others are used.

Ultimate guide + video tutorials on how to whitewash wood & create beautiful whitewashed floors, walls and furniture using pine, pallet or reclaimed wood. |

If you sprinkle a bit of sea salt on freshly applied paint, interesting effects arise. Fine and coarse grains of salt leave small, but nice-looking spots. This works only if the paint is thin, because the salt attracts the dye or absorbs it and the area between the grains remains lighter. After complete desiccation, the salt grains can be swept by hand or with a bristle brush.

Designskool new bedroom lights

If you sprinkle a bit of sea salt on freshly applied paint, interesting effects arise. Fine and coarse grains of salt leave small, but nice-looking spots. This works only if the paint is thin, because the salt attracts the dye or absorbs it and the area between the grains remains lighter. After complete desiccation, the salt grains can be swept by hand or with a bristle brush.


Sea sand mixed with paint looks very similar to a rough wall plaster. You can achieve this effect yourself, if you first buy a sufficient amount of sea sand. Optionally, quartz sand from the hardware store is also suitable. The surface should first be painted in the selected color with a paint roller. Let the paint dry and roughen it unevenly with steel wool. On parts of a second layer of paint is applied and scattered in the still wet color of the sand. After about 10-15 minutes, when the sand has absorbed the color, you can distribute it with a polka dot brush.


Very interesting effects arise when you create an exceptional paint roller yourself and thus attach the color. For this purpose, rolls of used packaging foil or baking paper serve excellently. Around the roll, string or a cotton yarn is wrapped and tied. Then the homemade paint roller is used as any conventional.


Similarly, a role that creates a dot pattern can be done by itself. Stick a piece of bubble wrap on a roll of toilet paper or cling film, apply a thick paint with a brush, and then roll on the surface for the purpose. The result is an irregular dot pattern.


A plastic bag or cling film serves as a kind of ink pad. Depending on whether an expressive effect is desired or not, this creative technique works on both a dry surface and freshly applied paint. A plastic bag is crumpled and used as a dab on a dry and pre-tinted surface. Another possibility is to apply cling film already when applying the base color and to remove it after drying out. The more wrinkles, the more effective the effect will be ..


Color blobs can be achieved in different ways. You can use a small or big brush or both. It is also possible to work with a Stupfpinsel, the blobs are denser. With the color intensity you can also play and use the color dissolved or concentrated.


The basic color can vary with this creative technique. For example, if you want to use multiple colors, a white background is recommended. If the color selection is limited to 2-3 colors, the area can be tinted.


Then you first take a small and then a large brush and hit it over the surface against an object, e.g. a stick, so that the paint sharpener from the brush hair loose. To strengthen the color intensity of some stains, you can treat them with a fine brush later.


To achieve a similar effect on larger areas, e.g. To educate women, you can take a handful of broomsticks and tie them together. This means that relatively small and equivalent stains arise.


A similar effect for small areas or objects is created with nail polish. Here, the right color combination is particularly important. It makes sense to choose an active, intense color and keep the other notes a bit more muted. In the photo, the background is also very effective.


This creative technique works wonderfully in the design of home accessories, where you must pay attention to specially suitable for the purpose of color schemes.


The speckles can be shaped into a specific shape as a figure. This requires a template that can be created from paper itself. Simply attach the stencil to the selected area and sprinkle over it with a brush.


Such a dresser like this, owned by the artist Jackson Pollock himself, can certainly make any fan of the so-called drip painting technique itself. Other highlights are the intense yellow-colored cabinet handles.


To dye cabinet handles easily and quickly, we recommend this little trick. A disused cardboard box or simply a piece of cardboard is ideal as a holder when dyeing small parts. Simply put all parts in the cardboard and paint as usual.


How to achieve the effect of exfoliated paint is certainly very exciting for fans of vintage style. This can be achieved in different ways and with a few tricks. Depending on what effect is desired, putty, sandpaper or certain color techniques can be used. Mainly an uneven and visually worn surface is achieved.

The vintage look can be achieved by applying several layers of low-viscosity paint. For this, the color is first dissolved. Then apply 1-2 coats and let it dry. After applying the other layers of paint, do not let them dry immediately, but put newspaper on the paint, wait a few minutes and then remove. The paper will partially absorb the color and produce an irregular effect.

Using a sponge and a matte paint you can apply paint irregularly and blur. To enhance the effect in some places, we recommend sanding edges and corners a bit to make the lower layers of paint visible.

A wonderful lace effect embellishes any piece of furniture or any wall. It just works. You only need beautiful lace fabric, which you can find small patterned by the meter. It is best to use old lace curtains, which are well suited for this purpose.

The second step is to choose two suitable colors – one darker and one light. The surface should first be darkened and allowed to dry. It’s best to wait until the next day before continuing. Then the tip can be attached to the darker ground and fixed if necessary.

Then you can apply the light color. You can use spray paints or paint with a small paint roller. The tip plays, so to speak, the role of a template.

With tape you can get great, geometric patterns and motifs on any surface. First, it must be sanded and thoroughly cleaned with acetone. A basic color is not required, but still recommended. Then simply design the pattern with the tape and paint over it with a paint roller. After about 5 to 15 minutes, depending on the room temperature, you can remove the tape.

ocean breeze blue chalk paint with distressing and a dark wax, natural wood refinished top

Without much effort, almost every piece of furniture can be spiced up and beautifully redesigned. The combinations of colors and the details, such as handles and decorative elements are particularly important. Here the dresser was designed in three main colors.




Leave a Reply

Your email address will not be published. Required fields are marked *